TORAY SK77

Description

 

The process of generating water with Toray’s dual filter structure

Regular tap water also contains minerals and organic substances. However, it also includes many impurities that are harmful to the body. Tap water contains E.coli bacteria, protozoa, Chlorine, rust, Nigori, Bromoform, Bromo – dichloromethane, Chloroform, total trihalomethane, Dibromo – chlormethane, agrochemicals, Trichloro – ethylene, musty smell, Tetrachloro-ethylene, soluble lead & many other bacteria. By using particle-activated carbon and ion exchanger with high efficiency in addition to removing residual chlorine causing chlorine smell in water, substances in JIS11 such as dissolved lead, total trihalomethane, and musty odors (2- MIB) will also be removed. Next, the water is passed through a multi-layer hollow fiber filter – Toray’s high-tech materials in the medical field help to remove rust, and bacteria in general, and prevent microscopic bacteria such as E.coli and micro-contamination such as other protozoa. Moreover, healthy minerals easily dissolve in water resulting in ionization. As a result, minerals can pass through the hollow fiber filter to create delicious filtered water without damaging important healthy minerals such as sodium, magnesium, etc.

Results are tested for sterilization performance based on voluntary standards. Complying with “Water Purifier Standards for Specific Substances” of the “Water Purifier Association”. Removes 99.99% of bacteria to the same standard.

Outstanding features of SK 77

Image of installation on a unified faucet that converses between filtered and raw water with one tap.

Image of installation with a dedicated faucet that provides filtered water.

Technical features

 

 

Product Code	SKC77.NJK
Type of Material	ABS
Filter Material	Activated carbon, hollow fiber filter (polysulfone), ion exchanger
Filter Speed	4.0L/min (water pressure 100kPa)
Minimum Water Pressure	70kPa
Water Filter Capacity	·        Residual chlorine in water: Total filtration Volume 13,500L (Removal rate 80% JIS S3201 Test Result) ·        Turbidity: Total Filtration Volume 13,500L (Filter Flow Rate 50% JIS S3201 Test Result) ·        Dissolved Lead: Total Filtration Volume 13,500L (Removal Rate 80% JIS S3201 Test Result) : The water filter capacity of each substance is measured for each unit according to the JIS test method. Therefore, in case that tap water is mixed with many substances, the replacement time may be earlier.
Substances not removed	Salts, minerals, etc. dissolved in water
Dimension	Diameter 85mm x Height 222mm
Weight	0.59kg (When pressing water 1.02kg)
Maximum pressure	350kPa
Estimated filter replacement time	12 months if using 35L a day
Use Carefully:	·        Please use standard drinking water ·        Flush water for 15 seconds before using every day, and flush water for 1-2 minutes before use when not using the machine for 2 days or more (To keep the water output clean) ·        If not used for more than 2 weeks, remove the filter core and replace it with a new one ·        Filter replacement time depends on the amount of water used, water quality, and water pressure ·        Avoid using warm filtered water above 35 degrees Celsius ·        Avoid using warm filtered water above 35 degrees Celsius .        Please use stored filtered water as soon as possible ·        Do not freeze the water filter ·        Do not use the device for unnecessary purposes ·        Be sure to connect the filter to the dedicated faucet for the lower link ·        Be sure to read the manual before use ·        For faucet specifications, refer to the faucet’s manual and a construction guide

 

Specifications SK77

[SK77 Dimensions] Length 269mm x Width 118mm x Height 126mm

[SK77 weight] 1.39kg (when pushing water 1.96kg)